Home Real Estate #70 Framing and insulating the walls of our old abandon ruin ➔ house

#70 Framing and insulating the walls of our old abandon ruin ➔ house

45
#70 Framing and insulating the walls of our old abandon ruin ➔ house

More about the screw system we setup here:

More info on the renovation:

Support our project here:

Join our patreon to watch the next video one week ahead (without adds)

Or. Hangout in our online community. also cool

source

45 COMMENTS

  1. In Portugal you need concrete pillars using steel inside, all around the building on each corners plus concrete beans also using steel inside connecting all the pillars….. otherwise your building can collapse on the firs earthquake…. we have a lot of small ones in the region.

  2. You should add a ceiling and maybe attics space for storage although it does look really nice heating that big room up over winter might be difficult also you should properly insulate the stove pipes with heat resistant material if it’s too close to any wood it could cause a fire but great job it’s looking awesome!!

  3. مرحبا لازالت المسافات بين الاشجار غير كافيه لعبور سيارات الاطفاء هذا غير لائق بعمل فريقي المحبوب وهناك بعض القصور في دراسة اسباب الحريق التى هي بفعل مسببات غير ارتفاع درجة الحرارة او البرق اوافتعال الحريق لطمس حقائق قد تكون من تجار المخدرات اذا كانت بين تلك الشجيرات انواع الشجر المخدر ويجب عليكم الاستعانه بخبير في ذلك المجال لاستخدامها في المجال الطبي قبل وصولها الى مدمني المخدرات .تحياتي

  4. These morons are insulating the building from the inside and don't even think about a vapour barrier. Do yourself a favour: disassemble everyting and ri-assemble on the outside of the wall.

  5. You will need ventilation bricks on the outside wall, you need more than one to allow cross ventilation for the trapped moisture between the bricks and the cork….. trust me mate.Good to see an Aussie there!
    Righto 👍🏻

  6. You will need ventilation bricks on the outside wall, you need more than one to allow cross ventilation for the trapped moisture between the bricks and the cork….. trust me mate.Good to see an Aussie there!
    Righto 👍🏻

  7. I absolutely loved the episode – congrats for the great work. It would be super interesting to know how many hours are spent for certain tasks. Can you include a timer on the next timelapses?

  8. Oh and one other thing….leaving open areas to see what's going on in the walls is how you get problems. Your open bricks in the inside will be way colder than the inside air, as opposed to the areas which you insulated. The moisture in the air will have a much easier time condensing on the cold brick than on your insulation. The insulation needs to work as a complete system, it does not work piecemeal.

  9. When you screw v-groove boards into the construction, you should use small screw and screw it on the angel in the middle of V-groove. This would hide a screw cause next board would fit into groove. Right now all screws are visible…

LEAVE A REPLY

Please enter your comment!
Please enter your name here